micro:bit workshop plan

The micro:bit workshop plan for the 2026/27 school year: which lesson is done at which workshop and in which month, with a short description of each lesson.

Safety and basics

  1. Workshop 1()

    Chapter 0Safety in the micro:bit workshop

    We work like little engineers — carefully, safely and together

    Chapter 1Electric circuit

    A first electric circuit with a battery, wires, a resistor and an LED: what current is, why a circuit must be closed and what to do if the LED won't light.

  2. Workshop 2()

    Lesson 1.1Electricity detectives

    Which materials conduct electricity, and which ones stop it?

  3. Workshop 3()

    Lesson 1.2Breadboard lab

    A breadboard for beginners: how the holes are connected underneath, and how to build a circuit without soldering in which a push button lights an LED.

Micro:bit and MakeCode

  1. Workshop 4()

    Chapter 2Introduction to the micro:bit

    What a micro:bit is and what's on it: LED display, A and B buttons, compass, accelerometer, temperature sensor, pins, Bluetooth radio, speaker, microphone.

    Lesson 2.1My first program in MakeCode

    A first micro:bit program in MakeCode: blocks, on start and forever, buttons A and B, the LED display, the simulator and copying it to the micro:bit.

  2. Workshop 5()

    Lesson 2.2How does our program think?

    Five small MakeCode programs for the micro:bit (greeting, heart, buttons, dice, score counter): predict, run and change one thing to see how they work.

Smart systems

  1. Workshops 6–7()

    Chapter 3Smart systems and connected devices

    A smart crossroads with the micro:bit - from the LED screen to two traffic lights that talk to each other

  2. Workshop 8()

    Lesson 3.1Lives and conditions

    A steady-hand game with the micro:bit: a lives variable, if / else, a wire as a switch on a pin, start and finish on the touch logo, and a stopwatch.

  3. Workshop 9()

    Lesson 3.2Radio games

    How micro:bits talk over radio: radio groups, a number or text as a message, rock-paper-scissors for two and hot potato for nine players.

  4. Workshop 10()

    Lesson 3.3The micro:bit as a controller

    The micro:bit as a remote control: the accelerometer measures pitch and roll, the sender sends the direction, and the receiver stops if the link is lost.

Maqueen: the robot's body

  1. Workshop 11()

    Chapter 4Meet the Maqueen

    The Maqueen robot with a micro:bit: the robot's parts, batteries, a safe start and the first drive forward, backward and turning in MakeCode.

  2. Workshop 12()

    Lesson 4.1How fast does the motor spin?

    What's inside a DC motor and why it has a gearbox; we measure how far the Maqueen robot drives in 2 seconds at different speeds.

  3. Workshop 13()Current workshop

    Lesson 4.2Driving to a plan

    The Maqueen robot drives a square: our own functions for driving and turning, the speed measurements, and why a robot with two motors doesn't drive straight.

  4. Workshop 14()

    Lesson 4.3Remote control

    The sender from the lesson The micro:bit as a controller drives the Maqueen robot over radio, and the safety rule stops the motors when the link is lost.

  5. Workshop 15()

    Lesson 4.4Switches and bumper

    A push button, a microswitch and a tilt switch on a breadboard with an LED, then a microswitch as the bumper of a Maqueen robot that bounces off walls.

  6. Workshop 16()

    Lesson 4.5Ultrasonic sensor

    How an ultrasonic sensor measures distance with an echo; the Maqueen robot stops before a wall, parks in front of a box and follows a hand.

  7. Workshop 17()

    Lesson 4.6Line sensors

    How infrared line sensors tell black from white; the Maqueen robot follows a black line on the floor with the logic blocks “and” and “or”, and stops at the finish.

  8. Winter break
  9. Workshop 18()

    Robot Olympics

    A Maqueen robot competition with no fighting: an obstacle course, a slalom, parking with ultrasound, a bumper maze and a line race.

Games with the robot

  1. Workshop 19()

    Chapter 5Programming games

    Games on the micro:bit: the game loop, sprites, score and lives, levels that get faster, and a game where you stop the clock at exactly 10 seconds.

  2. Workshop 20()

    Lesson 5.1A game with the robot

    Game states (waiting, playing, game over) in one variable and a countdown; the robot shows the state with lights and sound and touches three boxes with its bumper in 60 seconds.

  3. Workshop 21()

    Lesson 5.2Freeze!

    Freeze!: the referee sends KRENI (go) and KIP (freeze) over radio, and a robot that moves after KIP loses a life; the referee's STOP stops the robot, whatever the controller sends.

Components and sensors

  1. Workshop 22()

    Chapter 6Capacitor

    A capacitor is a small store of charge: we charge it from the battery pack and empty it through an LED, then see how it stops the micro:bit resetting when the motors start.

  2. Workshop 23()

    Lesson 6.1Light-dependent resistor

    A light-dependent resistor changes its resistance with light: with a resistor on a pin, the micro:bit reads a number from 0 to 1023. A night light and an alarm that beeps when a box is opened.

  3. Workshop 24()

    Lesson 6.2A robot follows light

    Two light-dependent resistors, left and right: the robot turns towards the brighter side and follows a torch, then runs away from the light like a cockroach.

  4. Workshop 25()

    Lesson 6.3Servo on the Maqueen

    A servo on the Maqueen: a positional servo turns to an angle, a continuous one spins at a speed. For each continuous servo we find the value at which it stands still.

Tower and weapon

  1. Workshop 26()

    Chapter 7Tower and tilt switch

    A tilt switch on top of a springy tower counts hits; how to avoid false hits when the robot bumps into something, and a moment of invulnerability after a hit, as in video games.

  2. Workshop 27()

    Lesson 7.1The weapon

    A soft hammer or a slow rotor on a servo knocks over the other robot's tower. The weapon moves only when the controller says so and stops together with the motors.

  3. Workshop 28()

    Lesson 7.2Who knocks whom?

    Experiments like an engineer: change one thing (arm length, speed, height of the hit), test it and write down the result; why a tall tower tips the robot over.

Your own robot

  1. Workshop 29()

    Chapter 8Scale drawing, prototype

    Drawing to scale on squared paper and measuring the Maqueen; a sketch of your own robot with its sizes, a cardboard prototype and a choice of 3D-printed add-ons.

  2. Workshop 30()

    Lesson 8.1The match program

    A program built from functions and reading someone else's program; the match program from a template: driving, weapon, tower, lives, START and STOP, and the safety rule.

  3. Workshop 31()

    Lesson 8.23D printing and fitting

    How a 3D printer works and why a print breaks along its layers; fitting the 3D-printed parts, decorating and testing the robot.

League

  1. Workshop 32()

    Chapter 9Tilt and speed, round 1

    The more you tilt the controller, the faster the robot drives: the tilt angle becomes speed (the map block). Then round 1 of the league.

  2. Workshop 33()

    Lesson 9.1Repairs, round 2

    Repairs and upgrades: why parts break, cable ties or screws, and better add-ons. Then round 2 of the league.

  3. Workshop 34()

    Lesson 9.2Blocks to text, round 3

    From blocks to text: the same robot program in JavaScript and Python in MakeCode, and a look at Arduino. Then round 3 of the league.

  4. Workshop 35()

    Final tournament

    The last round of the league, prizes, and showing the robots to parents.